Village Tech Hub · Made in Tamil Nadu
Smart pump & irrigation automation for every farm
Two rugged controllers and one app: start your motor and water your fields from your phone — with the protections running on the device itself, even when the internet is down.
- Works offline
- Phase-loss, overload & dry-run protection
- Long-range wireless mesh
- Android app · Alexa
AgroMesh Smart Starter
Fits in the motor panel beside your 3-phase contactor. Start and stop the pump from the app, on a schedule or automatically from the tank float — while it watches every phase.
- Start / stop from the app, schedules and irrigation sequences
- 3-phase current on R, Y and B (true RMS)
- Phase-loss trip in about 1 second — one or two phases
- Overload & dry-run protection with your own limits
- Separate inrush bypass and dry-run start delay (star-delta friendly)
- Dry-run auto-retry after the borewell recharges
- Power-cut auto-recovery (Auto / Manual)
- Tank float switch: auto start on empty, stop on full
- Detects starts and stops made by hand at the panel
- E-STOP mushroom button with latch and safe reset
- Sequences pause if the motor stops and resume where they left off
- Every protection runs on the device — no internet needed
| Controller | ESP32-C6 (Wi-Fi 6 · Bluetooth LE 5) |
| Current sensing | 3 × CT (1:2500), true RMS, field-calibrated |
| Outputs | START / STOP relays for the contactor (momentary pulse) |
| Inputs | Tank float switch (N.O. / N.C.), E-STOP button |
| Supply | 12 V DC |
| Connectivity | Farm Wi-Fi, or long-range wireless mesh through a nearby AgroMesh board |
| Setup | Bluetooth pairing from the app · Wi-Fi can be changed later from the app |
AgroMesh 6-Channel Valve Controller
Opens and closes up to six solenoid valves, so each part of the field gets its turn. Works hand-in-hand with the Smart Starter — the valve opens first, then the pump starts.
- 6 relay channels for solenoid valves
- Name each channel and switch any channel off
- Irrigation sequences valve by valve, with master (main-line) valves
- Valve-first, motor-first ordering — no dead-heading
- Every open valve has its own fail-safe close timer
- Per-valve ON / OFF timers and schedules
- Power-safe limit on how many valves open at once
- Relay test to check every channel and its wiring
- Several boards per farm, each with its own settings
- Keeps watering on time even when the internet drops
| Controller | ESP32-C6 (Wi-Fi 6 · Bluetooth LE 5) |
| Outputs | 6 relay channels (dry contacts) for solenoid valves |
| Supply | 12 V DC (valves on their own supply) |
| Connectivity | Farm Wi-Fi, or long-range wireless mesh through a nearby AgroMesh board |
| Setup | Bluetooth pairing from the app · channel names and on/off set in the app |
How it works
Pair
Power the board, open the AgroMesh app and pair it over Bluetooth in about a minute.
Connect
It joins your farm Wi-Fi — or, out of Wi-Fi range, links through a nearby AgroMesh board over long-range mesh.
Control
Start the pump, open valves, build sequences and schedules, and get alerts — from anywhere.
One app for the whole farm
Sequences & schedules
Water field by field on the days and times you choose, with master valves and automatic pause on dry run.
Alerts that matter
Phase loss, overload, dry run, power cut, tank full / empty and boards going offline — sound or silent, your choice.
Zones & sharing
Group equipment by area and share the farm with family or workers by QR code, each with the right access.
Voice control
Start and stop with Amazon Alexa.
Built for Indian farm conditions
- Safe without internet — protections, schedules and sequences run on the controllers themselves.
- Power-cut aware — waits for the supply to settle, then recovers only if you chose Auto.
- Long-range mesh — boards relay for each other across the field when the router is far away.
- Fix Wi-Fi without a reset — change the router from the app, or over Bluetooth standing next to the board.
Range depends on mounting, obstacles and antenna; typical open-field links reach a few hundred metres, and boards extend the network further by relaying.
Enquiries & dealers
For pricing, installation and dealer enquiries, contact us:
Village Tech Hub
23, Sidco Industrial Estate, Kesavaneri Road,
Vallioor, Tirunelveli, Tamil Nadu 627117, India
Email: villagetechhubpvt@gmail.com
Send an enquiry